水冷式螺杆冷水机
js345线路检测 www.computerarch.com 机组特点:
◆壳管式蒸发器与冷凝器、高效螺纹紫铜管（材质可根据要求定制）
◆PLC控制，LED触摸屏操作界面,直观操作，简易人机交流
◆R22冷媒，环保冷媒备选R407C等
◆380V-415V/50HZ 3PH标准设计，也可根据不同要求定制
技术参数：
水冷式螺杆技术参数 | |||||||||||
型号Model | JXT-WC | ||||||||||
40W | 50W | 60W | 75W | 85W | 100W | 120W | 150W | 180W | 200W | ||
名义制冷量 Nominal cooling capacity | 7℃ kcal/h | 108962 | 143018 | 153682 | 205540 | 242176 | 284918 | 333680 | 423550 | 510926 | 605526 |
7℃ kw | 126.7 | 166.3 | 178.7 | 239 | 281.6 | 331.3 | 388 | 492.5 | 594.1 | 704.1 | |
12℃ kcal/h | 130118 | 170796 | 183524 | 245444 | 289218 | 340302 | 398438 | 505852 | 610170 | 723174 | |
12℃ kw | 151.3 | 198.6 | 213.4 | 285.4 | 336.3 | 395.7 | 463.3 | 588.2 | 709.5 | 840.9 | |
输入功率Inputl power | KW | 28 | 34.8 | 38.5 | 50.3 | 56.7 | 66.6 | 79.6 | 98.6 | 120.4 | 140.1 |
电源电压supply voltage | 3PH 380V-415V 50HZ/60HZ | ||||||||||
冷媒refrigerant | 类型 type | R22 | |||||||||
充注量fill KG | 22 | 27 | 33 | 42 | 48 | 55 | 68 | 88 | 110 | 121 | |
控制方式control mode | 外平衡式热力膨胀阀 Expandsion valve | ||||||||||
压缩机Compressor | 类型 type | 半封闭螺杆式Semi-closed screw | |||||||||
启动方式starting mode | Y-△启动 | ||||||||||
能量调节capacity regulator | 0-25-50-75-100 | ||||||||||
功率power(KW) | 28 | 34.8 | 38.5 | 50.3 | 56.7 | 66.6 | 79.6 | 98.6 | 120.4 | 140.1 | |
蒸发器Evaporator | 类型 type | 干式壳管式（不锈钢式换热器）Dry shell and tube type (stainless steel heat exchanger) | |||||||||
水量Water(m3/h) | 20.5 | 26.1 | 29.5 | 39.5 | 45.6 | 49.7 | 62.4 | 81 | 98 | 115 | |
水管接口inch waterpipe joint | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 5 | 6 | 6 | |
水压降Water pressure dropkap | 32 | 35 | 38 | 42 | 42 | 45 | 40 | 43 | 45 | 45 | |
冷凝器Condenser | 类型 type | 壳管式Shell and tube type | |||||||||
冷却水量Water(m3/h) | 25 | 32.3 | 36.6 | 49.2 | 56 | 61.7 | 77 | 101 | 125 | 125 | |
水管接口inch waterpipe joint | 3 | 3 | 3 | 3 | 3 | 4 | 4 | 3*2 | 3*2 | 4*2 | |
水压降Water pressure dropkap | 42 | 42 | 43 | 43 | 43 | 45 | 48 | 46 | 48 | 48 | |
安全?；ぷ爸?/span> safety guard | 压缩机过热?；?，过流?；?，高低压力?；?，超温?；?，流量?；?，相序/缺相?；?，排气过分?；?，防冻?；?。Compressor overheat protection, overcurrent protection, high and low pressure protection, overtemperature protection, flow protection, phase sequence/lack phase protection, exhaust overprotection, anti-freeze protection. | ||||||||||
机械尺寸boundary dimension | 长Length mm | 2500 | 2550 | 2600 | 2800 | 2800 | 2900 | 3000 | 3300 | 3800 | 3900 |
宽Width mm | 780 | 780 | 780 | 950 | 950 | 950 | 1200 | 1380 | 1380 | 1380 | |
高Hdight mm | 1650 | 1650 | 1650 | 1800 | 1950 | 1950 | 1580 | 1630 | 1750 | 1750 | |
机组略重The unit weight | KG | 900 | 1050 | 1200 | 1800 | 1900 | 2020 | 2500 | 2650 | 3150 | 3350 |
运行略重operating weight | KG | 1050 | 1200 | 1350 | 1980 | 2150 | 2250 | 2700 | 2900 | 3400 | 3650 |
以上数据根据如下设计工况得出: | |||||||||||
1、冷冻水进/出温度为12℃/7℃ | |||||||||||
2、冷却风进/出温度30℃/38℃ | |||||||||||
(以上规格参数如有变更，恕不另行通知) | |||||||||||
